Thanks: 
Likes: 
Dislikes: Hi
I am having white dots on solid prints (could be on text also but can't verify).
Machine is a IR8105 and developer unit is new one, transfer belt(film) is also new.
Could be drum? Drum heater is on.
Any idea?
Thank you
Hi
I am having white dots on solid prints (could be on text also but can't verify).
Machine is a IR8105 and developer unit is new one, transfer belt(film) is also new.
Could be drum? Drum heater is on.
Any idea?
Thank you
"Who loves the roses,must also bear thumbs"
you said 'film' is new... did you clean the rollers below the belt/film? they can build up crap on them and cause spots..Originally Posted by tinnyjay
could also be the drum or even paper.
and pics of the problem?
Did you rewire the coronas?
Sent from my iPad using Tapatalk
Yes, i cleaned them.
"Who loves the roses,must also bear thumbs"
Primary corona is new also, the other no.
Last edited by tinnyjay; 01-17-2019 at 04:36 PM.
"Who loves the roses,must also bear thumbs"
You have to rewire them
Sent from my iPhone using Tapatalk
wonder how many techs bother doing the process proper anymore? I got quite good at restringing Canon corona's
I hate coronas. Especially when I lose spring on a gray carpet.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
yup ..sucks worse than a 2bit ho!I hate coronas. Especially when I lose spring on a gray carpet.
I used curved hemostats to hold spring while stringing that end.
Hemostat!? Good idea!
And for other side? Hex key?
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Reply With Quote
Bookmarks