Hi Guys!
I have a church that has a "ghost image" on every copy and print in bothe B/W and color...
I swithced all drums and ITB bet assembly and still the same result....any ideas?
Thanking you all in advance,
Doug
Hi Guys!
I have a church that has a "ghost image" on every copy and print in bothe B/W and color...
I swithced all drums and ITB bet assembly and still the same result....any ideas?
Thanking you all in advance,
Doug
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
1. cold environment
2. Drum
3. Drum cleaning brush
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Try switching out the fuser unit
Sent from my iPhone using Tapatalk
hi.
if you have replace the drum and you still having issues then you will need to check fuser.
if fuser is ok then you might just need to do abit of cleaning on the HVT pcb unit.to much charge over drums
IMG_0234.jpg I have attached a sample of the issue as you have requested...any help would be greatly appreciated!
Thank you Doug
Bookmarks