Thanks: 
Likes: 
Dislikes: I have a IR3025 that is throwing an 0B00 door open jam code at least a couple of times when making 50 copies. I have changed the door switch but that didn't fix it. Anyone have this problem on any IR series?
I have a IR3025 that is throwing an 0B00 door open jam code at least a couple of times when making 50 copies. I have changed the door switch but that didn't fix it. Anyone have this problem on any IR series?
did you check for broken door latches?Originally Posted by campy
The latches are fine. It did it even when I had my knee against it to make sure it wasn't popping out a little.
It might be the sensor for the Toner door. Make some copies and open that door while the machine is in motion and see if you get that code
Sent from my iPhone using Tapatalk
Check lower right door.
Check grounding plate on registration roller ( bent or dirty).
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
from canon
Error :
The jam code 0B00 is not listed in the service manual and indicates that the right door has been
opened while the machine is making a copy. The most common causes are door and lower right
door related.
Workaround :
There is a remote signal that runs through the HVT that shuts off power to the HVT if the door is
opened, if the signal is lost during copying the jam code 0B00 is the symptom.
In this particular case the HVT FM2-0261-000 was the cause of the jam.
Make sure the metal leaf spring on the registration rollers is making good contact. I bend it and apply conductive grease. Can cause all kinds of weird issues.
Reply With Quote
Bookmarks