Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 0
IR 2520 error code 713
Hi all,
I have IR 2520 with finisher, sometimes show error 713,
if power off the machine then ON again, print some copies then show error 713.
please any advise about this problem.
Regards
-
Re: IR 2520 error code 713
E713 0000 Title Erroneous communication with finisher
Description The communication does not restart by the error retry after the communication failure with the finisher.
Remedy
1.Check the cable.
2.Replace the DC Controller PCB (PCB4).
3.Replace the Finisher Controller PCB.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks