Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Sep 2013
    Location
    Burleson
    Posts
    288
    Rep Power
    0

    Canon DR-9080C Jamming

    Figured it would be best to start a new thread for this.

    I got another one of these scanners and it wont stop jamming. It is jamming just past the top optics unit. it seemed to work better when there were worn down retard rollers in there, the new retard rollers are causing jams almost immediately. It will take one or two pages tops before it stops.

    I replaced the whole assembly that houses the retard roller as well as the top two feed and pickup rollers...no difference. I'm stumped on this one. Any help would be much appreciated.

  2. #2
    teacher-guide-expert-guru 2,500+ Posts
    Canon DR-9080C Jamming

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,569
    Rep Power
    87

    Re: Canon DR-9080C Jamming

    Can be a bad motor or circuit board.Did you clean all sensors and black delivery rollers?
    Practice makes perfect
    If it ain't broke, don't fix it
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


  3. #3
    Senior Tech 250+ Posts
    Join Date
    Sep 2013
    Location
    Burleson
    Posts
    288
    Rep Power
    0

    Re: Canon DR-9080C Jamming

    Quote Originally Posted by zoraldinho View Post
    Can be a bad motor or circuit board.Did you clean all sensors and black delivery rollers?
    I'll try the circuit board...I cleaned all the rollers.

    The one on top or at the back.

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Jul 2013
    Location
    Kumasi Ashanti
    Posts
    82
    Rep Power
    0

    Re: Canon DR-9080C Jamming

    Quote Originally Posted by ABS tect View Post
    Figured it would be best to start a new thread for this.

    I got another one of these scanners and it wont stop jamming. It is jamming just past the top optics unit. it seemed to work better when there were worn down retard rollers in there, the new retard rollers are causing jams almost immediately. It will take one or two pages tops before it stops.

    I replaced the whole assembly that houses the retard roller as well as the top two feed and pickup rollers...no difference. I'm stumped on this one. Any help would be much appreciated.
    Whenever you have a situation of a jam, never try anything unless you are through with the state of sensors and their flags around the area where the jam is indicated. Make sure the seating of the new retard rollers is not cheating on a sensor or might be finding it difficult moving the paper over a sensor flag.
    After a copy paper passes over a sensor flag, the flag should smoothly go back to home position. If this fails, it will indicate a jam.
    Your fault appears to be more of mechanical than electronic. Paying more attention to the retard rollers and the sensors may do the trick.

  5. #5
    Senior Tech 250+ Posts
    Join Date
    Sep 2013
    Location
    Burleson
    Posts
    288
    Rep Power
    0

    Re: Canon DR-9080C Jamming

    Well i swapped a bunch of parts from a parts machine so im not sure exactly which one was the culprit but it seems to be working great now on letter paper but is jamming when coming out the top on 11x17...possibly another sensor not working? I'm about ready to tell this guy to trash it and get something else.

    Edit: Error Code P02

  6. #6
    teacher-guide-expert-guru 2,500+ Posts
    Canon DR-9080C Jamming

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,569
    Rep Power
    87

    Re: Canon DR-9080C Jamming

    JAM-P02= Front or back registration sensor has detected a document length that is longer than specified.


    Delivery rollers, slipping






    Scanner counter?


    Last edited by zoraldinho; 1 Week Ago at 11:14 AM.
    Practice makes perfect
    If it ain't broke, don't fix it
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


  7. #7
    Senior Tech 250+ Posts
    Join Date
    Sep 2013
    Location
    Burleson
    Posts
    288
    Rep Power
    0

    Re: Canon DR-9080C Jamming

    Quote Originally Posted by zoraldinho View Post
    JAM-P02= Front or back registration sensor has detected a document length that is longer than specified.


    Delivery rollers, slipping






    Scanner counter?


    Replaced delivery rollers from a different machine...might need to get brand new ones though i suppose.

    Counter at 3,808,933

    Reset the count though.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here