Canon iR2545

**purwoto** · 03-19-2019

Originally Posted by kuby

I would try reloading firmware/software first.

Yes, I will try it but where can I get the firmware.

**nicknt82** · 03-19-2019

Originally Posted by purwoto

Can it be solved with reload the system software?

As you said " the engine does not respond to anything, only the power light is on." So how can you reload F/W ?

If you can go on Service Mode, you can try reload F/W.

**purwoto** · 03-19-2019

Originally Posted by nicknt82

As you said " the engine does not respond to anything, only the power light is on." So how can you reload F/W ?

If you can go on Service Mode, you can try reload F/W.

ok thank you friend, so what steps should be taken?

**kuby** · 03-19-2019

Originally Posted by nicknt82

As you said " the engine does not respond to anything, only the power light is on." So how can you reload F/W ?

If you can go on Service Mode, you can try reload F/W.

***************************

You hold down the 2&8 keys while turning the machine on and wait for it to go into download mode...