Canon iR2545

[purwoto]

Hello All

I have a problem with Canon IR2545,
when the engine is turn on from the main switch, the engine does not respond to anything, only the power light is on. the engine will run after pressing the ON button in the control panel. even then the machine cannot be ready, only displays the progress bar. how to solve problems like this?

[yez]

have you clean RAM and ROM yet?

[purwoto]

have you clean RAM and ROM yet?

yes, I've done it, but didn't solve anything.

[kuby]

Did you try putting in another hard drive from a good machine?

[purwoto]

Did you try putting in another hard drive from a good machine?

not yet, because the machine is only one.

[kuby]

Do you have a hard drive and system software to reload?

[purwoto]

Do you have a hard drive and system software to reload?

What do you mean by hard drive? I have a laptop and cross cable to reload the system software, but I don't have the system software, do you want to share it with me?.

[nicknt82]

Hello All

I have a problem with Canon IR2545,
when the engine is turn on from the main switch, the engine does not respond to anything, only the power light is on. the engine will run after pressing the ON button in the control panel. even then the machine cannot be ready, only displays the progress bar. how to solve problems like this?

Clean RAM or replace new RAM. If's not solve, replace new Maincontroller PCB

[purwoto]

Clean RAM or replace new RAM. If's not solve, replace new Maincontroller PCB

Can it be solved with reload the system software?

[kuby]

I would try reloading firmware/software first.