Originally Posted by
Coptech
Have two machines as mentioned in the same location doing exact same thing. It only happens on longer runs and symptoms identical. Feeding into finisher, It starts making a "popping sound". It will get louder and then start nicking the lead edge of the paper (11" LEF) towards the operator side about a third of the way back. Eventually, it will jam with code 1011-01 and be rolling up in the finisher entrance guides. Cannot see where it is nicking or where the noise comes from. I suspect the way it behaves in long runs only, it is a clutch heating up and overdriving for a popping noise and maybe a gate catching causing the nick? Looking for the voice of experience here. Sure appreciate and advice.
Bookmarks