Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Senior Tech 100+ Posts
    IR7105 'Mode settings can be entered'  alarm

    songela's Avatar
    Join Date
    Mar 2008
    dar es salaam
    Rep Power

    IR7105 'Mode settings can be entered' alarm

    Hello guys please help with challenge!
    When switched ON, the machine seems to warm-up normally and the temperature rise can be monitored in Service Mode to reach FIX-C 200^ and FIX-E 192^ . The machine will then prime and enter the STANDBY cycle without change the display to READY. The display remains displaying 'Mode settings can be entered' continuously.


    I tried checking connectors on both machine side and the Fixing/Transfer Assembly but they happen to look normal. As well I could read some sensor signals from <COPIER> <IO> <DC-CON>.

    Please help on this and thanks in advance!

  2. #2
    Join Date
    Oct 2017
    Rep Power

    Re: IR7105 'Mode settings can be entered' alarm

    The first thing I would check is the stapler. I remember troubleshooting this years ago and being stumped. Seems that the stapler can be empty and cause this very issue. The fact that the fuser is at normal temp indicates all is well with the machine. FYI: the current firmware is 80.62.

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here