CLC2620 with Fiery C1 misaligned colors

[zoraldinho]

I'll get a certified tech to open the unit up and inspect,can't do much myself.

The only logical choice.
I suggest the Oganj company . I met some good guys long time ago.

[MunsterTech]

Yes, a very common issue with these and the CLC3200s, even with the ITB / drums etc it could still occur, if i remember it was something to do with the machine keeping old settings. Used to have do a main controller clear after doing all the P prints etc, you will have to to tell the machine it has a fiery again adn then put all the settings back, pain in the butt but it works, check the ITB first as in previous posts. Didnt think parts were availiable anymore for these, not from Canon direct here in Ireland anyhow

[craigster]

Call a Authorized canon dealer to look at it!! Those machines are money Pitts