Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Junior Member
    Join Date
    Mar 2019
    Location
    Tumen
    Posts
    7
    Rep Power
    0

    Service mode Canon imagePROGRAF PRO-2000 for reset maintenance tank chip?

    The container of reset of ink is filled for only 20%, and the plotter already blocked it. The local dealer and the service center is not engaged in plotters. All work stopped. It would be desirable to turn off this function (at least temporarily) (itself I will monitor the level of ink)
    Somebody will be able to help?

    IMG_6233-.jpg

  2. #2
    Service Manager 10,000+ Posts
    Service mode Canon imagePROGRAF PRO-2000 for reset maintenance tank chip?

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Service mode Canon imagePROGRAF PRO-2000 for reset maintenance tank chip?

    Quote Originally Posted by Technoman View Post
    The container of reset of ink is filled for only 20%, and the plotter already blocked it. The local dealer and the service center is not engaged in plotters. All work stopped. It would be desirable to turn off this function (at least temporarily) (itself I will monitor the level of ink)
    Somebody will be able to help?

    IMG_6233-.jpg


    eBAY

    Maintenance Tank Chip resetter For Canon Pro1000 Pro2000 Pro4000 MC-20 MC- 30 787893580696 | eBay

    Maintenance Tank Chip resetter For Canon Pro1000 Pro2000 Pro4000 MC-20 MC- 30
    $80.00
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Service Manager 10,000+ Posts
    Service mode Canon imagePROGRAF PRO-2000 for reset maintenance tank chip?

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Service mode Canon imagePROGRAF PRO-2000 for reset maintenance tank chip?

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #4
    Junior Member
    Join Date
    Mar 2019
    Location
    Tumen
    Posts
    7
    Rep Power
    0

    Re: Service mode Canon imagePROGRAF PRO-2000 for reset maintenance tank chip?

    Disable Ink Level Detection - I thank, already disconnected
    Maintenance Tank Chip resetter - I know about this device, but it would be desirable to turn off tracking programmatically
    Perhaps it becomes through the service program? Where to get it? (would disconnect almost constant clearing of a head at inclusion when in Maintenance Tank nearly 10 ml of expensive ink every time - very not a beautiful solution merge from Canon for more bysty devastation of purses of users)

  5. #5
    Service Manager 10,000+ Posts
    Service mode Canon imagePROGRAF PRO-2000 for reset maintenance tank chip?

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Service mode Canon imagePROGRAF PRO-2000 for reset maintenance tank chip?

    Quote Originally Posted by Technoman View Post
    Disable Ink Level Detection - I thank, already disconnected
    Maintenance Tank Chip resetter - I know about this device, but it would be desirable to turn off tracking programmatically
    Perhaps it becomes through the service program? Where to get it? (would disconnect almost constant clearing of a head at inclusion when in Maintenance Tank nearly 10 ml of expensive ink every time - very not a beautiful solution merge from Canon for more bysty devastation of purses of users)

    Disabling Ink Level Detection on the PRO-520, PRO-540, PRO-540S, PRO-560, PRO-560S, PRO-2000, PRO-4000, PRO-4000S, PRO-6000, PRO-6000S, TX-2000, TX-3000, TX-4000, TX-5300, TX-5400 printers:


    1. The message "The above ink tank may be an ink tank that ran out of genuine Canon ink or a counterfeit Canon ink tank." will appear on your printer's touchscreen upon installing a cartridge that was once marked as "empty".
    2. Move through the screens, performing the actions described in the messages that appear on the touchscreen.
    3. The printer will eventually ask you to disable detection by holding down the Stop button for at least 5 seconds and then releasing it.
    4. Ink level detection will now be disabled on that color. It will be your responsibility to check the cartridges from time to time and refill well before the cartridges truly run empty.

    don't see anything else


    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Junior Member
    Join Date
    Mar 2019
    Location
    Tumen
    Posts
    7
    Rep Power
    0

    Re: Service mode Canon imagePROGRAF PRO-2000 for reset maintenance tank chip?

    Thank teckat for help

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here