Hello
I got Canon IR 4025 machine with paper jam at Duplex unit , .Please check attachment.
Changed Side door,Connector , Harness wire side door to Engine controller And Engine controller PCB
Any help would be great.
Thank you
Hello
I got Canon IR 4025 machine with paper jam at Duplex unit , .Please check attachment.
Changed Side door,Connector , Harness wire side door to Engine controller And Engine controller PCB
Any help would be great.
Thank you
Jam code?
Are you a tech or user?
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
You switch complete door and still jaming? Hmm....Two bad doors? Probably humidified paper.
How often is jammed? Each print?
Try with turned paper Leter-R or A4 R. If worked change paper and set new values.
Set fixing control temp table: curled paperService Mode > (LEVEL 2) > COPIER > OPTION > IMG-FIX > TMP-TBLC> Select "2" (N1 mode with plain paper 1/2 (target temperature becomes low.)) or "3" (N3 mode with plainpaper 1/2 (target temperature becomes moreover low.)).
Set fixing control temp table: Thin (To use for thin paper setting)Service Mode > (LEVEL 1) > COPIER > OPTION > IMG-FIX > TMP-TBL5> Select "1" (S-thin paper mode (target temperature becomes low.)) or "2" (SS-thin paper mode (targettemperature becomes moreover low and lower the value of bias at the leading edge of the paper.)).
Inspect duplex solenoid,clean and inspect duplex flag sensor,worn flags,broken flappers....
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Bookmarks