Originally Posted by
Desert Rat
Canuck and Arcadian,
Thank you for your replies. Canuck, I am an indy and that makes me the salesman also. And if I did have a salesman, What could he do
except talk. I'm not sure what the fuser count is because I neglected to reset the counter when I installed the last one. But it is not that
high. The fuser rollers are clean and smooth. And in thirty five years of service I can not recall one time when a fuser left a negative image.
I am more inclined to think it's the drum unit that only has 7000 copies on it. This shows up best with my test target and is not seen
with line print. But I will see this machine again in a day or so. I will look things over again very closely.
The negative image repeats 95mm from the lead edge of the positive image.
The transfer belt is high, may be 98% of life. But the 95mm's don't add up. I think I will measure the t-roller, but I think I replaced that
not long ago also.
Does anyone know the circumference of these drums?
Thanks again
DR
Bookmarks