Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: ir c3220

  1. #1
    VegasWolf
    Guest

    ir c3220

    Have not seen this problem, When performing auto gradation adjustment black and cyan are normal but magenta and yellow are about 1inch from registration point or starting late. i have exchanged lasers and there is no change. Of course with the test page coming out so bad copier will not perform auto gradation and asks to reposition original on glass. I did try a differnt transfer assy, just in case and again no change. Is there an adjustment for that i can perform that commands the lasers when to start writing. Original problem was color registration was off. Hope this makes sense. Thanks for help

  2. #2
    Ricoh Fanboy 1,000+ Posts Oze's Avatar
    Join Date
    Jul 2008
    Location
    Toowoomba,QLD
    Posts
    1,662
    Rep Power
    63
    Try a DC clear under service mode....it seems to work if you've tried a new assembly with mixed results.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here