thanks will try
thanks will try
E070 ITB HP detection error
0001 HP of the ITB fails to be detected even
after the specific period of time.
Abnormality of the HP sensor,
Deviation of the belt from its position to
either edge, or soiling of the seal
Clean the HP detection seal, Clean/Replace the HP
sensor
0002 The next HP fails to be detected within
the specific period of time after the HP
of the ITB is detected.
Clean the ITB back side and the drive roller
0003 The next HP is detected earlier than the
specific period of time after the HP of
the ITB is detected.
The ITB is torn due to scratches, and the
sensor detects the tear as a HP by
mistake.
Clean the HP detection seal, Clean/Replace the HP
Hi,
I've changed the placement of this bit [part no. 16].
Now I get error code E000070-0003. Any clue please? I've installed a brand new ITB and it's all neat and clean. Thanks
Wrong Placement.JPG
Wrong Placement
Correct Placement.JPG
Corrected Placement
Bookmarks