Results 1 to 5 of 5
  1. #1
    Trusted Tech 50+ Posts
    Remove Paper From Output Tray Canon C5235i

    denvertan's Avatar
    Join Date
    May 2019
    Location
    Kuala Lumpur
    Posts
    82
    Rep Power
    0

    Remove Paper From Output Tray Canon C5235i

    This error strike after the copier is with the customer for a month++.
    I sticking a tape to cover the sensor near the output tray which temporary stop the message.

    I suspected this error is cause by a inner finisher is removed. And some parts is not properly installed.
    Can someone share with me the service manual so I can fix it. Thank you.

  2. #2
    Junior Member
    Join Date
    Aug 2017
    Posts
    4
    Rep Power
    0

    Re: Quitar papel de la bandeja de salida Canon C5235i

    Efectivamente es por que tenia un finisher interno y al quitarselo le tienes que poner un flat para evitar el mensaje de papel en la bandeja.

  3. #3
    Service Manager 10,000+ Posts
    Remove Paper From Output Tray Canon C5235i

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,656
    Rep Power
    658

    Re: Remove Paper From Output Tray Canon C5235i

    Quote Originally Posted by denvertan View Post
    Can someone share with me the service manual so I can fix it. Thank you.
    manual requests should be made in this forum:

    http://www.copytechnet.com/forums/se...nual-requests/

  4. #4
    Senior Tech 100+ Posts hidius's Avatar
    Join Date
    Jun 2015
    Location
    AU
    Posts
    126
    Rep Power
    19

    Re: Remove Paper From Output Tray Canon C5235i

    when you remove the inner finisher you have to put back the stack full sensor flag which is removed during the installation.

  5. #5
    Junior Member Megatsimepe's Avatar
    Join Date
    Sep 2019
    Location
    Accra Ghana
    Posts
    3
    Rep Power
    0

    Re: Remove Paper From Output Tray Canon C5235i

    Quote Originally Posted by denvertan View Post
    This error strike after the copier is with the customer for a month++.
    I sticking a tape to cover the sensor near the output tray which temporary stop the message.

    I suspected this error is cause by a inner finisher is removed. And some parts is not properly installed.
    Can someone share with me the service manual so I can fix it. Thank you.
    Please check the Sensor flag Within Where the Tray is.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here