Thanks: 
Likes: 
Dislikes: Tried switching fixing film unit, changed belt, drums, cleaned laser. Same result.
Any help is highly appreciated.
Br.
Sent from my Moto E (4) Plus using Tapatalk
Tried switching fixing film unit, changed belt, drums, cleaned laser. Same result.
Any help is highly appreciated.
Br.
Sent from my Moto E (4) Plus using Tapatalk
Originally Posted by darkocg88
Tried switching fixing film unit, changed belt, drums, cleaned laser. Same result.
Any help is highly appreciated.
Br.
Sent from my Moto E (4) Plus using Tapatalk
does smear issue travel on continuous printing ?
paper feed or cross-feed direction
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Yeah it travels.
Sent from my Moto E (4) Plus using Tapatalk
Tried switching fixing film unit, changed belt, drums, cleaned laser. Same result.
Any help is highly appreciated.
Br.
Sent from my Moto E (4) Plus using Tapatalk
Do you check Cleaning Belt? check if any piece of paper drop inside
remove transferbelt and Clean the sensor underneath. You can clean it by removing transferbelt and from the leftside of the machine. Clean the 3 sensor.Tried switching fixing film unit, changed belt, drums, cleaned laser. Same result.
Any help is highly appreciated.
Br.
Sent from my Moto E (4) Plus using Tapatalk
Sent from my HUAWEI VNS-L21 using Tapatalk
Every day of life is a learning process... Just make sure you are open in all aspects of comments.
Reply With Quote
Bookmarks