Results 1 to 6 of 6
  1. #1
    Technician
    Join Date
    Aug 2016
    Location
    jeddah
    Posts
    10
    Rep Power
    0

    Arrow canon ir Advance 8105

    dear all
    help is required for 8105 finisher is not staking loose ,but with staples perfectly staking

    replaced finisher controller & upgrade the firmware with latest

    any help ll be appreciated

    regards

  2. #2
    Service Manager 10,000+ Posts
    canon ir Advance 8105

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,910
    Rep Power
    230

    Re: canon ir Advance 8105

    Quote Originally Posted by imran181070 View Post
    dear all
    help is required for 8105 finisher is not staking loose ,but with staples perfectly staking

    replaced finisher controller & upgrade the firmware with latest

    any help ll be appreciated

    regards

    not staking loose

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Technician
    Join Date
    Aug 2016
    Location
    jeddah
    Posts
    10
    Rep Power
    0

    Re: canon ir Advance 8105

    Quote Originally Posted by teckat View Post

    not stacking ,thro 1 set on another top of set ,

  4. #4
    Senior Tech 100+ Posts techandtrader's Avatar
    Join Date
    Jun 2016
    Location
    Oklahoma City OK
    Posts
    172
    Rep Power
    8

    Re: canon ir Advance 8105

    Hes only Stacking good when stapling I think that is what he means.

    Run the adjustment or check age of flappers? What is the count in service more for the finisher parts? Maybe new flappers will stack standard prints....no staple.

  5. #5
    Technician Momiowilove's Avatar
    Join Date
    Sep 2019
    Location
    Al hasa
    Posts
    14
    Rep Power
    1

    Question Re: canon ir Advance 8105

    What is the jam code

  6. #6
    Senior Tech 100+ Posts Arcadian's Avatar
    Join Date
    Feb 2010
    Posts
    150
    Rep Power
    21

    Re: canon ir Advance 8105

    Quote Originally Posted by Momiowilove View Post
    What is the jam code
    when you turn on the printer does the stacker does it dance, goes up and down?? if not the fucntion of tyhe stack is possibly off you have to goto tech mode and turn it back on. i think it somewhere along the line techmode, stacker, adjust, then there might be a number 38 or something. you have to clear that number, just highlight the left then hit 0 on keypad. i know im talking out from memory here. i could be wrong. i had that issue a while back but clearing the code then restarting the machine made the sorter come back to life. there could be a broken actuator, make sur eall actuator are working.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here