Canon iRC 3220 C1 network setup

[moe0303]

Hi, just got one of these in from the wholesaler and I'm trying to configure it to get on my network so I can test it. It has a C1 Fiery on it and I can't figure out where to input the Network settings like IP, subnet mask, and all that stuff.

I mostly deal with Ricohs, but I have done a few of these Canons but this is the first one with this type of server attached to it. TIA for any help.

[haydar64]

push printer at screen, and select printer properties, and u must be set up (install) from zero configuration.

select install network or install sequences, and configure to your network type and IP adresses.

if this screen is not change in 2-3 minutes, u must power off and re-on your machine and re-enter this menu.

(sorry for my english)

[SCREWTAPE]

You must run set up.
Hit the printer tab on the control panel, if you don't see it hit the arrow to right then proceed to hit printer status>functions>run setup>network setup> and save everything.

Screwtape

[Oze]

push printer at screen, and select printer properties, and u must be set up (install) from zero configuration.

select install network or install sequences, and configure to your network type and IP adresses.

if this screen is not change in 2-3 minutes, u must power off and re-on your machine and re-enter this menu.

(sorry for my english)

Your English is better than most native English speakers I've met lately