Thanks:
0
Likes:
0
Dislikes:
0
-
Take a good look at the upper fuser roll collars also. Crack the fuser open and make sure they are not reversed...the reason i say this is because you said fuser recently rebuilt..fuser bias can short from bearing rubbing and chewing aluminum from upper fuser roll.
-
Copier Psychologist
250+ Posts
- Rep Power
- 39
Had to replace deck 1 with a new one and it seems to have done the trick.Will check the harnesses to see if there is a pinched wire but for now the macnine is up and running.Thanks for all the help guys!
-
Re: Ir 7105 shuts down
clean the fixing connector
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks