LinkBack URL
About LinkBacks
Reply With QuoteHave you try that adf on one of the other units. If so,does the problem carry on?Originally Posted by pontiac
I have a ir-330 that we installed a B1 adf from a IRc 3200. When choosing 2 sided function only the first side is copied the second side is blank. WE have other units with these model adf and have never had this issue. Any tips, thanks
Last edited by pontiac; 05-22-2009 at 08:45 PM. Reason: wrong info
Have you try that adf on one of the other units. If so,does the problem carry on?
The ir330 adf is a B1....the 3200 is a K1. Similar but different(sep pad, possibly controller). 330 scans multiple ithink.....3200 scans once. Check the controller pwb part numbers and see if their the same.
SCREWTAPE , We installed the adf on another ir-330 and the same issue. We also tried another K1 adf and the same issue It will copy the first side, reverse the original and leaves it on the platten on the right side and the scanner is scanning the left side, then ejects the original, the copy comes out with side one and the second side is of the adf belt. Is there programming that has to be done. thanks for responce.
Different adf controller boards ....don't think you can put a 3200 doc feeder on an ir330...machines scan differently
I agree..
Have made this mistake too!!! you Cannot swap tops!!! start over!!!!
Hey everyone thanks for the feedback. Went to check on copiers in the field and think i foumd the problem, copiers are IR 400's not 330's all have K1 feeders. Is that the mainborad or a seperate pcb that controlls that? Thanks for replys.
It's the ADF Controller PCB...in the document handler. B1 is FG3-0233-110 and K1 is FG3-2745-000.
You techs are to cool. Thanks for the feedback.
Bookmarks