Canon iR Service Mode

[valera]

hello, any one know how to enter service mode level 3 on canon iR...

[mrfixit51]

hello, any one know how to enter service mode level 3 on canon iR...

I assume it is the same as level 2, after entering service mode, *3

Have you tried that?

[Desert Rat]

I have not heard of a third level svc mode. What is the model
number?

DR

[SCREWTAPE]

hello, any one know how to enter service mode level 3 on canon iR...

Press "*", then Press "2" and "8" simultaneously, then Press "*"
- Press " * ", then Press "1" and "9" simultaneously, then Press "*" "3"
I recommend not to make any changes. This level is normally use to clear an E355 error code.

[smiley]

hi,can i ask, what do call the *1739*?thanks

[valera]

thanks srewtape!!!....the *1739* is the ingeneer mode....

[smiley]

thanks srewtape!!!....the *1739* is the ingeneer mode....

thank you friend.

[mujibur]

hello, any one know how to enter service mode level 3 on canon iR...

press

1.2 Starting Service Mode and Making Selections

1) Press the User Mode *’ .
2) Press ‘2’ and ‘8’ on the keypad at the same time.
3) Press the User Mode key ‘* ’ on the control panel.

In response, the following Initial screen will appear