I'v a Canon Imagepress C1, it didn't work after thunder and storm (bad weather) and show a error code "e00061-0009", anyone can help?
Thanks more.
I'v a Canon Imagepress C1, it didn't work after thunder and storm (bad weather) and show a error code "e00061-0009", anyone can help?
Thanks more.
thanks.
c1 run to adjusting gradation...
show error E000061-0015.
Thanks more.
Have you checked the primary corona ass'y? Clear the error first and then try to run a full auto gradation.
thanks,
how to check primary corona?
thanks more.
You Could just remove it and look at the wire!!!!
Or the service mode 2 level.
thanks,
& how to service mode?
thanks more.
Ok heres where you can get into problems
Friend you need to at least know how to get into the service modes.
On the C1 there is 2 levels
That much you must know if not even I feel you might be over your head.
And I usually help anyone that asked.....
This C1 is a real Bitch in the settings and you could change or even erase
some very things that would just make it a door stop.
Thats right....if you don't know the C1...or yet how to even get in service mode on a Canon,don't play with it or like Penvy said it will become a door stop or boat anchor
Call a canon dealer if you are not tech. Some parts may have to be maintain or replaced.
Bookmarks