IR6000 "please wait" message after switching on

[mtech]

After you try to copy and the machine says suspended, check the job status. I am almost 100% sure you will see a red add staple icon on the screen. Replace the staple cartridge and you should be all set. If the staple cartridge can't advance this will cause the issue. Very common with Canon.

[freeman]

	Quote:			Originally Posted by Tech109
	Hi I have a IR6000 after switching on the machine is booting and then displays "please wait" then stays on and won’t finish the boot. Thank You,

try *28* then chk ur hdd it ll start 99% to 0% if stops b4 0% then chg ur hdd