Gp405 Copier : Dirty Edge

[xtraez]

Hi all,
I need your help and advise.

Machine : Canon GP 405
Problem : Edge dirty after printing 1000+ See the image below :

or link Picasa Web Albums - Nazri

Action Taken:
1.Open Drum unit : Clean the charger roller and remove waste toner and clean the blade.

Happen after 1000++ printing.

2. Change new clean blade...

Happen after 1000++ printing.

I'm really sick now. please help me.
2. Change new

[mitsubee]

1000 copies straight copying non stop or your count by accumulating ?

thanks

[xtraez]

	Quote:			Originally Posted by mitsubee
	1000 copies straight copying non stop or your count by accumulating ? thanks

It happen during copying process after 1000++, and also i found charge roller dirty( toner on stick to chager roller) at that particular area.

please help ...

[davidj7]

replace charge roller and check!

[Oze]

You haven't said how old the drum is either...how many copies?

[welshman]

another thing to check is the blank exposure lamps all working they provide blank lead edge

also check the blank lead edge setting if set to nothing the toner will foul up the charge roller transfer roller etc etc

other than that the drum unit transfer roller and is it genuine canon toner or katun toner

[xtraez]

Hi..
Oze ... i change new fresh drum # 1.. it happen after 1700 copies during continues copy process.

welshman ... please quote me with menu i should enter.. this "check the blank lead edge setting if set to nothing the toner will foul up the charge roller transfer roller etc etc ".

Davidj7 ... i will try your method ....

Thanks for the respond... please

[mrsoul]

	Quote:			Originally Posted by xtraez
	Hi.. Oze ... i change new fresh drum # 1.. it happen after 1700 copies during continues copy process. welshman ... please quote me with menu i should enter.. this "check the blank lead edge setting if set to nothing the toner will foul up the charge roller transfer roller etc etc ". Davidj7 ... i will try your method .... Thanks for the respond... please

Have you replace the spacer roller, as spacer roller may deformed after machine run above 250k.

[davidj7]

i forgot to ask you in the last post, does this happen only in copy or print or in both

[marc.lucas]

Replace the drum unit & transfer roller WITH GENUINE CANON, I’ve tried the pirate drum & blades but they don’t last as long as the complete unit so it’s not worth the hassle.