Canon ir2870 Error e000100-0001

Alright, I will check that tomorrow morning, but I'm fairly certain I can hear it. I will look for the shutter.

Thanks!

I have seen that shutter get stuck and cause E100
Open up that left side panel, four screws. But i would
Call for service, you might need a part anyway.
Save yourself the trouble and time.

Goodluck.

[alex@wocltd.com]

seeing this more and more often -specially after transport - the laser SAFETY shutter assembley breaks - get a tech but ask him to bring part beforehand

[SRINATARAJAN]

hello i am new to the forum and highly appreciate your forum and knowledge.

I have a canon ir2870, and i am receiving error code e000100-0001, telling me to turn the printer off and then back on, same error everytime i try to use it. I have read the forums, and it seems to be a dc controller? Please let me know if it could be something else.

If that is most likely my issue, can anyone please direct me to a website i can purchase parts from? I'm not having any luck buying them from ebay.

Also, this error started after my wife tried using sticky labels from the drawer when i wasn't home, if that could cause a problem, and you have any suggestions pleaes let me know, i really need this machine back up and running.

Thank you!
Paul

it is only communication error you clean the transfer and charging pc rollers and reset the error code by using all ram clear.

[SRINATARAJAN]

it is only communication error you clean the transfer and charging pc rollers and reset the error code by using all ram clear.

if necessary ple call +919884234000