Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 33
iR-C3200 Duplex Jam 010A, no duplex motor...
The motor for the rollers right as the paper is going to go under the fuser does not come on. It works fine in component test mode. It does come on while copying maybe once in 50 tries, but it is very rare for it to work. I have loosened wire ties at the Duplex PCB and in the harness of the duplexer as well. Knowledgebase seems to point to Duplex PCB and Fuse PCB.
Thanks for looking at my problem...
Chris
-
Senior Tech
100+ Posts
- Rep Power
- 33
hi,i would try duplex pcb,duplex tray and dccon,can u rob an old mc to do this.
-
Technician
- Rep Power
- 30
Double check the right motor is coming on. I had found a problem with the manual showing the wrong number in part check. And the problem was the motor. There is another motor in that tray that you can use to troubleshoot.
-
replace duplex driver pcb,duplex motor and fuse pcb at the same time
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks