Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    mikibu
    Guest

    Canon IR 3235 network printing issues

    Hello everybody

    I want to setup an IR3235 in my office
    I'm n00b in copiers ...

    I was able to install scanning over network without problems :
    iR got an IP on the network, I can Ping it, and I can "push" scans to my PC with Color Network ScanGear

    BUT I'm freeze on printing !!!

    PC win XP SP3
    I have tried PLC, UDF and PS drivers... no way !!!
    My printing datas stay blocked on the PC

    Anyone can help ?

    Best Regards
    Miki

  2. #2
    Technician
    Join Date
    Aug 2009
    Location
    Cardiff
    Posts
    16
    Rep Power
    30
    Does it have a print boot rom? Is it a 3025 or 3025i? Only the i models have a print rom as standard.

  3. #3
    Service Manager 250+ Posts
    Join Date
    Sep 2008
    Posts
    384
    Rep Power
    35
    Also if it does have a print boot rom, can you try printing using a laptop hooked up via crossover cable to the copier?

  4. #4
    mikibu
    Guest
    Hi Masters, thanks for reply !

    even direct printing with crossover cable does not work

    It's an 3235 not a 3235i

    As i understand printing capacity is an option ...

    On 3235, how do you check if the print boot rom option is installed ?

  5. #5
    Service Manager 250+ Posts
    Join Date
    Sep 2008
    Posts
    384
    Rep Power
    35
    Go into service mode and check the version of the Boot-Rom. Should also check to see that firmware for printing e.g. PS/PCL is installed as well.

    You'll need a tech to bring a print boot rom, install it and update the firmware using SST if you want to get printing to work if you don't have the boot-rom and/or the necessary firmware installed on the copier. So you'll need to decide whether this is worth the cost.

  6. #6
    mikibu
    Guest
    bnmand, many thanks

    I have a tramp in service mode

    copier _ display _ version _ BOOTROM = 01.20
    copier _ display _ version _ SYSTEM = 01.55 02.35 10.09 00.25
    copier _ display _ version _ ROOT = 01.28

    copier _ display _ ACC-STS _ PS/PCL = 0

    Can I hope print with this ?

  7. #7
    Technician
    Join Date
    Aug 2009
    Location
    Cardiff
    Posts
    16
    Rep Power
    30
    If you press the "123" key for the counters, then hit device configuration. You should see UFR and PCL in the options, if not you need a print kit - this is a MEAP application.

  8. #8

    Join Date
    Jan 1970
    Posts
    0
    Rep Power
    0
    You should be using a UFR driver rather PS, PCL. Ufr is the standard driver, unless you require post script or PCl printing you need extra accessories to do so.

    There's is no bootrom require because the program is activated with LMS.

  9. #9
    Senior Tech 250+ Posts alex@wocltd.com's Avatar
    Join Date
    Nov 2007
    Posts
    430
    Rep Power
    38
    ^^^^^^^ correct, we had it when they have failed to start up - you now have to buy a main controller which sucks(and costs££$$) just because they have change the architect of the board also now using sata hdd

  10. #10
    mikibu
    Guest
    press the "123" key for the counters, then hit device configuration
    No UFR option
    No PCL option


    You should be using a UFR driver .....There's is no bootrom require because the program is activated with LMS
    I'm using UFR II drivers - > ok

    So I need to activate a software option using MEAP & LMS ?

    If I'm right, can you tell me more about the procedure ?

    I'm totaly new with this machine... I'm the final user

    With Best Regards and Many Thanks

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here