Canon IR C5180 H1 Print Server Issues

[THUK]

can you log into it via command workstation.

[skynet]

No i haven't. What info. will i lose. Will a DC Con P Print record what may be lost so i have a backup. Will try. Thanks.

As you are trying to set up the ip address etc you wont lose anything.

Have you tried the H1Version2 firmware?

00 is a good thing. If you clear MMI make sure that you switch the interface option back to 0 from 3 to eliminate any further complications from occuring. Yes the software is installed directly to the imagepass via crossover, just follow the instructions when you start loading the firmware. Other things you can try is reseating ram or try replacing it. You can can also try the HDD, but since its booting up with 00 I would try the ram first or MMI. Good luck.

[jsw2k]

I'm curious if you have reconciled this situation, because I find myself in the same boat, except the fiery is an X3. Messages are just "..wait a moment...", after which time it resets to the home screen. I did not try to connect to the fiery directly, but how do you control it? Through SST?. When I bypass the fiery, I can "see" the machine on the network, and i can scan from it, but can't print. Any help would be greatly appreciated.