Tech forums for copier repair  

Go Back   Copytechnet.com > Technical Forums > Fax & Printer Technical Discussion > Canon

What is needed to print to my ImageRunner C3220? **PIC**

Canon

Reply

 

LinkBack Thread Tools Display Modes
Old 09-02-2009   #1 (permalink)
Junior Member
 
Join Date: Sep 2009

United States
Posts: 5
Rep Power: 0Team Stockyards is on a distinguished road
What is needed to print to my ImageRunner C3220? **PIC**

I just purchased a Canon C3220. I have AT&T DSL at the office and currently have my laptop and desktop connected to the internet. I am wanting to print to my new Canon C3220.

What is required to do that? Cable and software? If so, what kind of cable and where does it plug in?

Here is a pic of my unit...

Team Stockyards is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Sponsored Links
Old 09-02-2009   #2 (permalink)
Lead Service Technician
500+ Posts
 
mrfixit51's Avatar
 
Join Date: Oct 2008

United States us iowa
Location: Davenport, Iowa
Posts: 542
Rep Power: 8mrfixit51 will become famous soon enough
we need more info...

Does it have print capability? The picture is nice but is really not too helpful. Does the copier have an ethernet jack on it? You bought it from whom, did the previous owner give you any information about this copier, like if they were able to print to it? We can be more helpful if you give us more information.
mrfixit51 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 09-02-2009   #3 (permalink)
Junior Member
 
Join Date: Sep 2009

United States
Posts: 5
Rep Power: 0Team Stockyards is on a distinguished road
NO prop...I know nothing about this printer...It was given to me by a friend who had it in his warehouse.

I did look at there IS an ethernet connection. Would I just go Ethernet out of the laptop to Ethernet on the copier?
Team Stockyards is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 09-02-2009   #4 (permalink)
Lead Service Technician
500+ Posts
 
mrfixit51's Avatar
 
Join Date: Oct 2008

United States us iowa
Location: Davenport, Iowa
Posts: 542
Rep Power: 8mrfixit51 will become famous soon enough
my first suggestion...

Warm up the copier, when ready to copy, press *Additional Functions button, select Report Settings, click on Network, print out User Data.
This will tell you what your current network settings are, listed on the report.
mrfixit51 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 09-02-2009   #5 (permalink)
Junior Member
 
Join Date: Sep 2009

United States
Posts: 5
Rep Power: 0Team Stockyards is on a distinguished road
ok...did it and got tons of info....what am I looking for?
Team Stockyards is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 09-02-2009   #6 (permalink)
Junior Member
 
Join Date: Sep 2009

United States
Posts: 5
Rep Power: 0Team Stockyards is on a distinguished road
hey there...I can fax this report to you. I could even scan it and email it to you...
Team Stockyards is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 09-02-2009   #7 (permalink)
Field Supervisor
1000+ Posts
 
SCREWTAPE's Avatar
 
Join Date: Jan 2009

United States us california
Location: Oceanside
Posts: 1,012
Rep Power: 13SCREWTAPE will become famous soon enoughSCREWTAPE will become famous soon enough
Hit the counter check button>hit device configuration, this will tell whether or not you have a printer kit installed. Another way to find out is, if you look at your control panel, at the top you would see, copy, mailbox, if you see a scan tab then you have a printer kit. If you go to additional functions>system settings>network settings>IP address and configure the machine with a IP address. You would need a crossover cable if you want to connect directly from a laptop. Since you have AT&T DSL, see if you can connect a patch cable(ethernet cable) to your AT&T DSL modem. If not, purchase a switch or a router set up a little network. It seems like its much to do but its very simple once you start setting it up. Email me that user data list at, Screwtape5185@yahoo.com.

Last edited by SCREWTAPE; 09-02-2009 at 05:54 AM..
__________________________
SCREWTAPE.
SCREWTAPE is online now  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 09-02-2009   #8 (permalink)
Trusted Tech
50+ Posts
 
Join Date: Apr 2008

United States us nevada
Posts: 60
Rep Power: 4wingnut132 is on a distinguished road
The iRC3200 series came with and ethernet port to update firmware, just because the has an ethernet does not necessarily mean that it has a print kit, just as some have parallel and usb ports, again that does not mean that they have print kits. Pressing the counter check button does not always show if the unit has a print kit either, it used to nice when just techs were on the forums, now alot of endusers, either some of the techs posting replies are trying to confuse them even more or they just do not know the A** from a hole in the ground!!! just tell them to call someone who knows what they are doing, some of us actually are trained on the equipment. Just keep taking money out of our pockets, yet you are probably the first to bitch about the economy, and just remember you idiots elected him.
wingnut132 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 09-02-2009   #9 (permalink)
Field Supervisor
1000+ Posts
 
SCREWTAPE's Avatar
 
Join Date: Jan 2009

United States us california
Location: Oceanside
Posts: 1,012
Rep Power: 13SCREWTAPE will become famous soon enoughSCREWTAPE will become famous soon enough
Quote:
Originally Posted by wingnut132
View Post
The iRC3200 series came with and ethernet port to update firmware, just because the has an ethernet does not necessarily mean that it has a print kit, just as some have parallel and usb ports, again that does not mean that they have print kits. Pressing the counter check button does not always show if the unit has a print kit either, it used to nice when just techs were on the forums, now alot of endusers, either some of the techs posting replies are trying to confuse them even more or they just do not know the A** from a hole in the ground!!! just tell them to call someone who knows what they are doing, some of us actually are trained on the equipment. Just keep taking money out of our pockets, yet you are probably the first to bitch about the economy, and just remember you idiots elected him.
Having a bad day.
__________________________
SCREWTAPE.
SCREWTAPE is online now  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 09-02-2009   #10 (permalink)
Lead Service Technician
500+ Posts
 
mrfixit51's Avatar
 
Join Date: Oct 2008

United States us iowa
Location: Davenport, Iowa
Posts: 542
Rep Power: 8mrfixit51 will become famous soon enough
Quote:
Originally Posted by SCREWTAPE
View Post
Having a bad day.
I agree,,, must be that time of the month
mrfixit51 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

Tags
c3220, imagerunner, needed, pic, print

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Google

All times are GMT +1. The time now is 05:45 PM.


Your Link Here
Toner Chip Resetter
Your Link Here

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.3.0
Ad Management plugin by RedTyger