NP6035 Error E@C ????

[Funnyfarm69]

Yes, you did read it correctly, I have an NP6035 which says in the display "ERROR E @ C switch off and on etc. Cannot clear in service mode. I have scratched a bald spot on me head with this one. Any ideas????

[blackcat4866]

I've worked on a lot of the NP-6035s and I've never seen a code like that. Could there be a bad area of the display screen corrupting the view of an "E005" or something like that?

Does it attempt to initialize?

Does the main power switch kick itself Off? If yes, it is most likely a scan lamp or heater lamp problem.

Let us know what you discover. =^..^=

[adel_nassan]

just try this
enter to service mode and make ram initial
tell us what happened!!!!

[bineeshgeorge]

Hai,

Is your scanning lamp turn ON continuously, from the time of machine turn ON ?

Replace / Repair the power supply PCB, your problem will be solve ......... good luck...

[Funnyfarm69]

Hi all, at the moment I am just about to upgrade the customer with a new machine. As soon as I get the 6035 back I will try what you have suggested and post the results.

Thanks for your time and help.

[bineeshgeorge]

Hai Mr. Funnyfarm69,


Just replace power supply PCB . E@C is related to power supply.................