iRC 3480 service mode

[mrfixit51]

	Quote:			Originally Posted by roho
	Flashed with ver 91-rui ver is listed as 87.45. User mode and service mode rui is active. However when attempting to access RUI, following message appears-rui contents not found.

Did you make sure that RUI got written to the hard drive? I would try loading it again and select OVERWRITE in the lower left panel of the SST, to make sure you get a clean load of RUI. It sounds like it is not finding it or that the files in it may be corrupt....

[SCREWTAPE]

Print out a P-print. Verify that all firmware is loaded, MEAP, RUI, ETC As Mr Fixit mention. Format the hard drive, reload firmware, do a ALL_HDF. Make sure all batch files load. When you are trying to access RUI, is this this from one workstation or multiple workstations. Can you ping the machine. Which browser are you using? You can try Firefox. Check your browser settings, try clearing the temporary files of that browser which you are having problems with. Can you print from the workstation that you are trying to access RUI from? Do you have a laptop? Have you connect direct?. Is (dedicated port) enable.

If you try connecting direct, then you can see if it works. It could be a possibilty that the computers or network is causing this issue.

[roho]

Thanks! Will be going to that account a little later.
Will check on above suggestions and post back!