IRC 2380

[jose dai]

I need help color missmatching prints and copiers

[Kapten]

In first stage checkITB assembly.
Second Change ITB Assy

Give us more info then its possible to help...

How is pg 10 looking and pg6, is it misslining in feed dir .
Good Luck

[jose dai]

I made test print number 10,12,6 its ok but when i print and copy is a shame .and the machine has made only 10.450. Coler. But thanks any way i will chek the itb again

[jose dai]

There is no displacement only color missmatching,i tried to make a color missmatching corection

[mrfixit51]

	Quote:			Originally Posted by jose dai
	I need help color missmatching prints and copiers

Do your prints appear to be o.k., but your copies don't match the colors correctly? That is what I read from your statement. If your registration is o.k. then I would not worry so much about the ITB. Be sure to run Auto Gradation, to sync the scanner to the print engine. This needs to be done everyday!

[jose dai]

copies and prints come bad, i performed a gradiation adj,color miss matching correctiion and stir 4 but still

[SCREWTAPE]

	Quote:			Originally Posted by jose dai
	copies and prints come bad, i performed a gradation adj,color miss matching correction and stir 4 but still

Maybe its time to replace drums.
Stiring is not much of a requirement with these models.