Ir 4570 copies through out adf lgl size cannot come clearly?????

[SCREWTAPE]

How many trays do you have? "Let's just say you have two"
When you go into paper select what sizes do you see?
A4,A4-RA3,B4,LTR,LTR-R,LGL,11x17. What do you see.. Have you checked the inch size switch on the side of the cassette next to th blue dial, you A/B and then inch. There has to be a wrong setting some where.

[SESHU]

i have 4 cassetes. 1. A4, 2.A4R , 3.LGL, 4.A3.
YOU KNOW MY MECHINE WORKING ADF WHEN IAM TAKING NEW ONE. ALL SIZES COORECTLY PRINTED. NOW A DAYS IAM USING MOSTLY A4 ONLY. BUT RECENTLY I HAVE TRY TO USE A LGL COPIES . BUT PRINT ITS COME MIIDLE OF PAGE.

ON THE GLASS IS CORRECLTY PRINTED. WHEN IAM MAKE A COPY THROUGH ADF.
ONLY LGL AND A4 R PRINTING STARTING ANY TRAY OR BY PASS TRAY ALSO MIDDILE OF PAGE PRINTING.

WHAT TO DO??????????

[mrfixit51]

	Quote:			Originally Posted by SESHU
	ON THE GLASS IS CORRECLTY PRINTED. WHEN IAM MAKE A COPY THROUGH ADF. ONLY LGL AND A4 R PRINTING STARTING ANY TRAY OR BY PASS TRAY ALSO MIDDILE OF PAGE PRINTING. WHAT TO DO??????????

When you are making copies thru the ADF, are you selecting the paper to be copied onto, or is the selection set to AUTO?

Try it on AUTO,, if it feeds shorter paper than your original, then the problem lies in your ADF, because it cannot sense the paper length. Check your entry tray length sensors,, they both should be activated by legal paper or longer.

[SCREWTAPE]

	Quote:			Originally Posted by smiley
	hi you have to set the feeder to A4.go to service mode then go feeder function then press try-A4 then ok then adjust feeder guid toA4R and press try-A4R then ok then do it in all paper size follws.gud luck

Did you try this yet?
It sounds like you might have
to initialize your ADF tray settings.

[SESHU]

	Quote:			Originally Posted by SCREWTAPE
	Did you try this yet? It sounds like you might have to initialize your ADF tray settings.

HI..
HOW CAN I TRY THIS METHOD????????

how can i check A4 R AND LGL..

IN FEEDER FUNCTION DISPLAYS. TRY A4,TRY A5R,TRY LTR,TRY LTR R ONLY ...
THERE IS NO DIAPLAY TRY A4 R AND LGL AND A3 ...

HOW CAN I ADJUST AND HOW CAN I SET IN THESE OPTIONS WHAT YOU SAID AND ABOUT MY PROBLEM...
MY PROBLEM IS PRINTING STARTED A4 R AND LGL... ANY (WITH OUT A4) MIDDLE PAGE OF THE COPY PAPER..
HALF PAGE WHITE AND HALF PAGE COPY PRINTED..


AND HOW CAN I INTIALIZE ADF SETTINGS?????????

GIVE ME REPLY FRND...

[SESHU]

	Quote:			Originally Posted by mrfixit51
	When you are making copies thru the ADF, are you selecting the paper to be copied onto, or is the selection set to AUTO? Try it on AUTO,, if it feeds shorter paper than your original, then the problem lies in your ADF, because it cannot sense the paper length. Check your entry tray length sensors,, they both should be activated by legal paper or longer.

HI...
I CAN TRY WHAT YOU SAYS.......

PROBLEM LIKE AS IT IS COMMING...CANNOT IMPROVE AND CANNOT ACTIVATED??????