Ir 4570 copies through out adf lgl size cannot come clearly?????

[SESHU]

okay people we have small communication problem.The paper seshu is refering to LGL/Legal .The length of the paper is different from what canon knows as LGL. I had the same problem with ADF in 605 onwards. We have somehow managed to work around the problem.I'll check and get the details.if what i assume is correct then in copy .5 inch from the trailing edge would be erased.


Why its not working in A3 i have no idea. So either his adf has a problem or someone has screwed up the settings.


my suggestion to seshu is first forget about LGL ,try to get A4R and A3 correct , check your adf in another machine if you have.

iam already checked two mechines...
these mechines worked perfectly.. a4,lgl, a4r,a3 .. these are copies worked thru adf...

my mechine also worked all sizes in adf / platern whenever iam newly take the mechine...worked great . iam apreciated that time also..

mostly iam using in that time a4 copies heavily.

after one month completed ..it will come some problem. copies came out one side poor light and one side copy good. means page horigentally half page light half page dark..

then iam complaint gives whenever iam taking my mechine. he service engineer) will come and checking all parts. allare very good. last chance will goto he do a ram reseted.

then it will comes very good. in that time iam not checked all sizes in adf.

after some days iam checked lgl (legal) , a4r , and a3 . (without a4) thru adf. cannot come clearly. half page copy printed. half page white.
then problem i found it.

that's y my problem it comes whenever he reseted the ram.
i think he ram reseted . all functions including feeder functions also erased/reseted..

that's y adf cannot take other sizes (without a4)..

now i want in feeder function set to lgl (legal), a4r and a3 paper sizes.
how??????
in feeder function displays a4, a5r, ltr, ltrr. sizes . i also checked
what ever do mr fixit says. all result o.k!.

how can i set/change (feeder function ) a5r, ltr, ltrr sizes to a4r, lgl(legal),a3 sizes...

how can i do..

how can i set it...

what to do?????

[montana]

hi..i think your broplem is related to the cassette paper size ...you have to specify the paper size of the cassette by turning the paper size knob to the desired paper size.. A4...A4R...A3..etc..check & adjust the size of paper in the cassette..i hope it is help.

[mrfixit51]

Hello Seshu,

You are not checking things in the function mode as I described,, you are telling the copier that the width guides are at a certain point in their travel.

The clearing/resetting procedure knocks out those settings.

Just do the A4 and A5R settings. Do as I described. Put the guides in the proper place for the paper type, highlight that setting in the left column, and then press the o.k. button. The machine will now take those two settings to determine the width of the page, no matter where you place the guides thereafter. I can make myself no clearer on this procedure....

[SESHU]

Hello Seshu,

You are not checking things in the function mode as I described,, you are telling the copier that the width guides are at a certain point in their travel.

The clearing/resetting procedure knocks out those settings.

Just do the A4 and A5R settings. Do as I described. Put the guides in the proper place for the paper type, highlight that setting in the left column, and then press the o.k. button. The machine will now take those two settings to determine the width of the page, no matter where you place the guides thereafter. I can make myself no clearer on this procedure....

hi.. mrfixit..

i can do each and every thing five times above checking.. whatever you says right thing...

place the proper paper and place the right paper size guide. and press the o.k button..

result is : service .. o.k !

every time iam checking result its comming.. o.k!!!

what to do...

[davidj7]

could you scan a copy and upload it here

[karta]

1. after U set the tray adf as shown, click the display and there is ..
FeedSize _____ pls try one copy lgl or FLSCP Paper. FeedSIze shown the machine's sensor read. pls check out the FeedSize if LGL we'll get blank white the correct is FLSCP

2. Pls to setting :
Copier (level 1) Option > Body > ModelSZ= 3 ( 0 = A Type, 1= Inch, 2= B, 3= Inch and A/B Type
Copier (Level 2) Option > Body > ORG_LGL = 1 ( default is 0 )

3. if it doesnot work pls Re-Install the System Software.

[SESHU]

1. After u set the tray adf as shown, click the display and there is ..
Feedsize _____ pls try one copy lgl or flscp paper. Feedsize shown the machine's sensor read. Pls check out the feedsize if lgl we'll get blank white the correct is flscp

2. Pls to setting :
Copier (level 1) option > body > modelsz= 3 ( 0 = a type, 1= inch, 2= b, 3= inch and a/b type
copier (level 2) option > body > org_lgl = 1 ( default is 0 )

3. If it doesnot work pls re-install the system software.

thank you for replying....

You are saying this is for adf or platern????
This problem is only adf!!!

O.k.. I will check whatever you says....

I will go to first feed size try to a one lgl copy in to adf.... That is displys feed size is empty... When put lgl copy and press to start it will disply feed size j-b4 and try wide displays 1562.

as well as i go to a4r- feed size displys ..j-b5r and try wide displys 1485.

now what to do????

[MrB]

The other thing you may want to check on the tray
Check the Switch on the RH side at the front
NOT the dial, but the little white plastic switch right of the dial
Had it once and it confused the hell out of me till i swapped C1 & C3 over

[SESHU]

The other thing you may want to check on the tray
Check the Switch on the RH side at the front
NOT the dial, but the little white plastic switch right of the dial
Had it once and it confused the hell out of me till i swapped C1 & C3 over

hi...
all copies working through platern...

but when i make copies thru adf ...does not came out clearly...
problem is only for adf settings...

how can i set it adf settings.. a4r and lgl,a3 copies.........

[pirate]

hi...
all copies working through platern...

but when i make copies thru adf ...does not came out clearly...
problem is only for adf settings...

how can i set it adf settings.. a4r and lgl,a3 copies.........

1.check the sensors in the adf tray
2.check the sensor cable in the adf tray
3.Try to make a copy in AUTO mode