Try Performing Tray width adjustment.
In service mode FEEDER>FUNCTION>TRY-LTR OR A4 Move side guides to each size that you use and press ok .... Ok for each size. This can be found in service manual pages 4-14 and 4-15. Hope this helps.
Try Performing Tray width adjustment.
In service mode FEEDER>FUNCTION>TRY-LTR OR A4 Move side guides to each size that you use and press ok .... Ok for each size. This can be found in service manual pages 4-14 and 4-15. Hope this helps.
i am already doing ...
this method is already mrfixit says nefore post in this thread.......
but no activating..
i have one doubt clearly... in feeder function there are four functions (for try sizes) ......!!!!
there is displays try-a4, try-a5r, try-ltr, try-ltrr...
these are sizes to displyes . iam already doing when paper insert into adf. and press o.k . service .result is o.k.
but i am using a4,a4r,lgl and a3. there is displys anthor sizes. how to match my paper sizes. and how to set my try settings (in adf) . iwant to set these try settings a4r,lgl,a3. (wtihout a4...a4 already worked).
how?????????
Not even gonna waste time with this one...CALL A TRAINED TECHNICIAN....
Bookmarks