Ir 4570 copies through out adf lgl size cannot come clearly?????

[SESHU]

HI FRNDS.....

THIS PROBLEM IS SAID TO ONLY FOR ADF.

MY IR 4570 MECHINE A4 COPIES ARE IS COMING VERY WELL IN TO ADF OR PLATTERN GLASS.. IN PLATERN GLASS ALL COPIES PRINTED VERY CLEARLY. SO PROBLEM IS....... WHEN I MAKE COPIES THROUGH OUT THE ADF . A4 SIZE PAPERS/COPIES PRINTED CLEARLY. THAT'S NOT PROBLEM.

O.K .

BUT WHEN I MAKE COPIES THROUGH ADF LEGAL, A4 R and A3 SIZE PAPERS SCANNED SUCCESSFULLY BUT COPY PRINOUT ITS COMES FIRST OFF PAGE WHITE..DOWN THE PAGE OFF COPY PRINTED.. THAT MEANS PRINT OUT IS MATTER PRINTED START AT DOWN OFF PAGE. CANNOT PRINT COMPLEATLY. FIRST OFF PAGE WHITE PAGE.. DOWN OFF START THE PRINT.THAT IS PRINT OFF ONLY.

HOW IT IS?????
A4 SIZE PAPERS VERY WELL TO PRINTOUT/COPIES ITS' COME VERY CLEARLY .

BUT PROBLEM ANY A4 R AND LEGAL SIZE AND A3 PAPERS PAPERS SCANNED SUCCESFULLY.WHEN COPY PRINOUT ITS COME OFF PAGE.
PRINT CANNOT START THE UP EDGE. PRINT START 'S MIDDILE OF THE PAGE EDGE.

CAN U SOLVE ANY BODY THESE PROBLEM.

[Kapten]

I dont know if i has understand your problem.

But the first to check is the sensors in the adf tray.
Change the photointeruptor with each other and se for the result.

One flag is possible displaced..

It could be the width sensor that had came out of place or needs an adjustment in sm / mode feeder

The cable to the green lamp could be defect
Good luck

[SESHU]

But a4 copies adjusted hight and width very clearly..
Only lgl and a4r papers copies printing starting middle of the paper..
How can i adjust lgl,a4 r and a3 size sensor settings...

[smiley]

hi you have to set the feeder to A4.go to service mode then go feeder function then press try-A4 then ok then adjust feeder guid toA4R and press try-A4R then ok then do it in all paper size follws.gud luck

[SESHU]

hi..
thank you for reply...

how can i check A4 R AND LGL..
IN FEEDER FUNCTION DISPLAYS. TRY A4,TRY A5R,TRY LTR,TRY LTR R ONLY ...
THERE IS NO DIAPLAY TRY A4 R AND LGL AND A3 ...
HOW CAN I ADJUST AND HOW CAN I SET IN THESE OPTIONS FOR ABOUT MY PROBLEM...
MY PROBLEM IS PRINTING STARTED A4 R AND LGL... ANY (WITH OUT A4) MIDDLE PAGE OF THE COPY PAPER..
HALF PAGE WHITE AND HALF PAGE COPY PRINTED..

GIVE ME REPLY FRND...

[mrfixit51]

	Quote:			Originally Posted by SESHU
	But a4 copies adjusted hight and width very clearly.. Only lgl and a4r papers copies printing starting middle of the paper.. How can i adjust lgl,a4 r and a3 size sensor settings...

If I understand your problem, the copies are way down on the page cutting off your image? ( I don't work with A sized paper in the States, so I don't, know offhand which sizes are comparable to which sizes I deal with) If the pages are long, like legal, make sure the tray sensors are being activated. Curled paper will not hold them down, and then the copier makes wrong decisions for you. Try your long documents with the flags taped down just for a test, to see if you get good results. If you do, then you have a problem with curled originals.

[SESHU]

I am checking all type of orizinal sizes. A4 copies are comes its clearly..
lgl size and a4r and a3. i think these paper sensors cannot activate.
I can checking lgl size and a4 r originals .these are checking somany types of way to checking. But cannot comming. Half paper white middle of the paper printing started.

I konow curled originals cannot come priniting.

And i can set it to originals where is flags dispalyed. That'sway iam following.

But no results..

[mrfixit51]

	Quote:			Originally Posted by SESHU
	I am checking all type of orizinal sizes. A4 copies are comes its clearly.. lgl size and a4r and a3. i think these paper sensors cannot activate. I can checking lgl size and a4 r originals .these are checking somany types of way to checking. But cannot comming. Half paper white middle of the paper printing started. I konow curled originals cannot come priniting. And i can set it to originals where is flags dispalyed. That'sway iam following. But no results..

Lets stick with legal here for the sake of easy understanding... If you put a legal sized document on the document glass and copy it, is your image correct? Now, if you tape down the two long paper sensor flags on the document feeder entry tray, and feed your legal sized document thru the doc feeder, is your image correct?

Are the dials set correctly in the paper drawers to properly signal what paper is in each drawer?

[costd]

I also do not work with the A4/A3 settings - but it seems a little strange that you can mix the LGL in with the A3. LGL is inches and A3 is metric (I think). Make sure the drawer dial and US/Metric are properly set.

[sgcopiertech]

check your paper size identification signal 2 (LENG2S) JS-2