| 1. The Fixing Assy. (usually you have a worn film showing on edge of copies and possible intermitten dog eared copies on side of worn film)
2. On the Right Hand Door, when closed, sits right above the Fixing Assy. , there is a black deflector of sorts that has two little black pads underneath both ends of it. First make sure that you the deflector is moving freely. Usually the pads melt and the deflector will stick and give you a 0208 accordian jam in the Fixing Assy.
3. If you have the Internal Finisher S1 installed, remove the (2) black idler rollers w/springs that are in the exit path just above/after the Fixing Assy. and right before the Finisher Inlet. Don't ask me why, but there were tech pubs on this and on previous models when the Internal Finisher was installed, you would remove these puppies.
The C2880 is slightly different. The Fixing Assy. is very different and I believe the delivery area and deflector is different. Haven't had this jam with the color series as much. Let us know if you see the machine again (besides your nightmares). | 
Linear Mode
