white copy in IR2200

[pengtech]

Check whether the paper is damp or not. Also check the developer engagement system ( the engagement bar ) sometimes the plastic catch behind the bar came off causing different pressure in locking the developer. Change the composite power supply and the transfer unit.

[creppy]

Hi every body
Am Adel from Egypt
i have a white copy in IR2200
i change the drum unit , toner tank , and DC board
i chick the bias of primary and devolper tank are ok
ther is no image on drum
please help me
please write replay in simple english because my english is bad
thanks
bye

chek potensial control, potensial sensor, scan lamp, laser unit, and reader controler

[Oze]

Dev bias...or as simple as not locking the dev back into place after fitting a drum...(a trainee Tech did that with me on a call today)

[Tim C]

Are you using an OEM Drum... I have had issues with genaric drum units for this machine...They look ok but they fail quite often. do you still have the old drum. put it back in and try it.

[madu132]

do you use original toner?
if not maybe you mis use with toner for ir 7200/8500.
It happens once with me.

try to clean the developing and then refill with fresh toner