Canon ir 6570

Brucere99 · 3 Weeks Ago

Need network help on a canon ir 6570. I can ping the copier, but
cannot print.

skynet · 3 Weeks Ago

Does it gave a 'N' bootrom?

Brucere99 · 3 Weeks Ago

No, i checked the bootrom and there is no n

SCREWTAPE · 3 Weeks Ago

You must have a printer kit installed. Check the counter button under device configuration and check to whether there is printer kit installed, UFRII, PCL should be present if not then there is no printer kit.

Brucere99 · 3 Weeks Ago

Is it possible the card is in the copier, but software was not installed?

Thanks

SCREWTAPE · 3 Weeks Ago

	Quote:			Originally Posted by Brucere99
	Is it possible the card is in the copier, but software was not installed? Thanks

The program is embedded into the main controller thus must be activated with a license.

As far as I know there is no compartment where you can store this card.

Jehuu · 2 Weeks Ago

	Quote:			Originally Posted by Brucere99
	Need network help on a canon ir 6570. I can ping the copier, but cannot print.

which driver, printer language, did you use?
what was the error code in printer job log?
Test it with UFR2 printer language.

as long as i can remember you could not configure network settings if the copier didn't have a printer board installed, i could be wrong.

Jehuu

costd · 2 Weeks Ago

1. You never indicated if you checked the device configuration to verify IF you have the printer kit installed.

2. Yes, you can configure network settings without it having a printer kit. The "kit" is nothing more than activating the lisc (as in everything else, hardware, is there).

3. IF you do have the printer kit installed (and activated by lisc) then make sure you are using the right driver.

mrfixit51 · 2 Weeks Ago

	Quote:			Originally Posted by Jehuu
	as long as i can remember you could not configure network settings if the copier didn't have a printer board installed, i could be wrong.

To add to what Costd replied to, the newer boxes come with network capability built in, (1) for software upgrading, (2) so the the device can be managed remotely through RUI. You can do any number of things like fax address book maintenance, see whether the system is up and running, etc, etc, etc.

Gerhard · 2 Weeks Ago

	Quote:			Originally Posted by Brucere99
	Need network help on a canon ir 6570. I can ping the copier, but cannot print.

Check if your ip range settings under network/tcpip settings are witin the scope of the users network.

Regards