ir7200 wait .......

[jiongpao]

i got an ir7200 and it appear e602-003 at the beggining. After i change the hardisk, formated, loaded system files using SST and restart the machine it show Wait ..... and stop at the end of the loading bar for long time.

If the change of main pcb controller require should i use back of it counter chip?

[CanonHPTech]

Did you use a supported Hard Drive? If not, it will copy software correctly, but you won't get to READY state. Just because it is the same size, the model of the drive matters with these machines. Yes, the counter MUST be transfered to new board or won't boot.

[nivssluck]

Format again your HDD then load the System, RUI and Language.

If you change the main controller you should put back the original Counter PCB else you will encounter an error.