Service Mode entering for Canon IR3300

[joshinitinj]

Hi,
I want to enter service mode in Caon IR3300. I came to know through internet, on pressing *, 28 (2 & 8 together for some time),
* you can enter in service mode. I tried lots of time but could not enter in Service mode. Can anybody help me where am I wrong??

[pga]

yes. u should able to access it. or press * 49 *

[joshinitinj]

Thanks,
I will try *49*. Could also clear my below doubts??
1. 4 & 9 should press at the same time
2. how much time interval is require between * & 49 and again for *

[SCREWTAPE]

	Quote:			Originally Posted by joshinitinj
	Thanks, I will try *49*. Could also clear my below doubts?? 1. 4 & 9 should press at the same time 2. how much time interval is require between * & 49 and again for *

The 4&9 does not apply to these models. Stick with the 2&8 sequence,just keep trying. Hit reset once in a while then try again.

[D_L_P]

	Quote:			Originally Posted by joshinitinj
	2 & 8 together for some time

Just hit 2 & 8, you do not need to hold it down. And I agree with Screwtape sometimes it takes a few tries (and correct about the 4&9 alt didn't start until 2270's).

[andy21557]

technicially its not the * button its additional functions button its the * with the circle around it

[pengtech]

I agree with Andy, maybe he got the wrong * button. It should be the * with the circle right below the ? button. If it won't work possibility that one of the button is not working ( poor contact ).

[Sturay]

The correct sollution is "User settings, 2&8, User settings" if the LUI (Local User Interface" hangs or locks the possibilty of entering the Service mode, press (the yellow) Clear/Restet button and try again.
The Yellow button will work as a release button, if you fail to enter the right combination.
Good luck!
"User setting" a.k.a.: star boy, nose star, fan brain or star fellow

[mrfixit51]

	Quote:			Originally Posted by Sturay
	The correct sollution is "User settings, 2&8, User settings" if the LUI (Local User Interface" hangs or locks the possibilty of entering the Service mode, press (the yellow) Clear/Restet button and try again. The Yellow button will work as a release button, if you fail to enter the right combination. Good luck! "User setting" a.k.a.: star boy, nose star, fan brain or star fellow

Hi Sturay,
Is your button actually labeled User Settings? In the US, the button is labeled Additional Functions...

[SCREWTAPE]

	Quote:			Originally Posted by joshinitinj
	Hi, I want to enter service mode in Caon IR3300. I came to know through internet, on pressing *, 28 (2 & 8 together for some time), * you can enter in service mode. I tried lots of time but could not enter in Service mode. Can anybody help me where am I wrong??

I know I answered before. I was wondering... Why do you need to get into service mode?