Canon gp335 code e-220

[asambatra]

I have a code E-220 on my gp 335..
What can i do to resolve it?
Thank you

[mrfixit51]

	Quote:			Originally Posted by asambatra
	I have a code E-220 on my gp 335.. What can i do to resolve it? Thank you

I have to make a leap of faith on this one, the gp335 is similiar to the iR330. The scanning lamp is what is causing the issue. It does not appear to be bright enough.

- Check for bad lamp.
- The intensity sensor has a fault.
- The CCD PCB has a fault.
- The composite power supply PCB has a fault.
- The DC controller PCB has a fault.

[Gerhard]

	Quote:			Originally Posted by mrfixit51
	I have to make a leap of faith on this one, the gp335 is similiar to the iR330. The scanning lamp is what is causing the issue. It does not appear to be bright enough. - Check for bad lamp. - The intensity sensor has a fault. - The CCD PCB has a fault. - The composite power supply PCB has a fault. - The DC controller PCB has a fault.

Mrfixit is spotton !!!

The Gp335 uses a flourecent scanning lamp. Check the end of the lamp for discolouration (black rings). If so replace !!!

PS: its good to now the old timers are still around!!!!

Regards

[alex@wocltd.com]

you can also take a small capactior of the cpsu to prevent re-occurence