Waste ink reset on MP190

[DadO]

I don't know the procedure for clearing waste ink count on MP190 (not the MPC190 ).

Thx.

[Oze]

This is for an MP145 but it should be the same procedure for other models:

These are the step How to Reset waste ink counter (error E16) :
1. Turn off power button (power button is in ),
Press and Hold STOP/RESET then Push ON/OFF button
2. Hold ON/OFF button, press STOP/RESET button 2x
3. Let go of both buttons and printer is in SERVICE MODE
4. Printer will be readying
5. After printer is ready, push STOP/RESET button 4x. (Waste ink counter reset)
6. Every time you push STOP/RESET button ,
ON/OFF lamp will change green and orange.
7. cycle power

[DadO]

I am in service mode and i see displaying "0" but when i press stop/reset button 4x time i can't see change on lamp. I cycle the power but E27 continue to display.

Thx oze on help

[Oze]

Apparently THIS is the fix:

Reset Waste Ink Canon MPC190 :

1. Press MENU COPY SCAN COPY COPY

2. This will take you to TEST MODE

3. Use the + key to take you through to PRINTER TEST (option 8)(if you go past, either keep keying the +, or you can use the - to take you back)

4. Ensure that it shows 8-3 on the screen. This is EEPROM CLEAR

5. Press OK

6. It will show 0 INK COUNT

7. Press OK

8. Press the STOP/RESET button

9. Press the ON/OFF button

10. The printer won't turn off, but will "reset" itsel

[DadO]

This is MP190.There is no C letter . I tried fix when printer is still warming up and when it's in E27 state. I always get e27. I tried both ways more then few times. This works for MP"C"190 but not for my MP190.

[amuba]

This is for an MP145 but it should be the same procedure for other models:

These are the step How to Reset waste ink counter (error E16) :
1. Turn off power button (power button is in ),
Press and Hold STOP/RESET then Push ON/OFF button
2. Hold ON/OFF button, press STOP/RESET button 2x
3. Let go of both buttons and printer is in SERVICE MODE
4. Printer will be readying
5. After printer is ready, push STOP/RESET button 4x. (Waste ink counter reset)
6. Every time you push STOP/RESET button ,
ON/OFF lamp will change green and orange.
7. cycle power
------------------------------------>solusi reset permanet download for Do it yourself Inkjet and Laser Printer Repair

[vaclav borc]

I am in service mode and i see displaying "0" but when i press stop/reset button 4x time i can't see change on lamp. I cycle the power but E27 continue to display.

Thx oze on help