Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 30
Light Copy at bottom
Hi all,
I am Canon IR3300 user and technician. When I keep A4 page in vertical position bottom part (may be 20 to 30 % of A4) comes lighter than remainng. I removed platten glass, clean beam with spirit but still the problem is same.
Can anybody help me to rectify the problem.
-
Senior Tech
100+ Posts
- Rep Power
- 33
hi,does it print if so is the cq the same.look at dev assy,drum unit and tran roller-check the springs are ok on front and back of tran roller-does it have a dust proof glass.also check fuser film.
-
LOL..so as a tech you don't know what to call paper other than "vertical"?
SIGH...ok...check the transfer roller as they sometimes have the spring missing from under the bushing....check the dev to make sure that a)...there's toner on the cylinder and b) there's toner actually IN the dev.
-
-
Yeah David...I mean no racial slurs or anything but it CAN be a sore point with brand trained techs.
And as for rebuilding GP405 fusers...I used to rebuild NP fusers
-
-
Technician
- Rep Power
- 34
bottem side copy light
hi
if copy imprision uneven
it is problam with toner unit because of un even brush formet
do one thing remove the toner from unit
then blowout unit clean the meg roller
after that u can carryout with fresh toner
i hope it will works to u
if u have any problam u can contact me i will suggest u
copynprint@gmail.com
have a nice day
-
Technician
- Rep Power
- 0
check your developing cylinder 1st either at the bottom its is solid black..if ok..clean transfer roller above duplex and primary roller beside drum..
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks