Cannon NP7161

[Alex]

I got one Cannon NP7161 in start up it shows E000, this happen. I start the machine without conecting the 2 thermistors before it it have some paper jam error I rectified it. How I can entr the service mode. Pls help me

[Mirohav]

1. Starting Service Mode

1) Press the User Mode key.
2) Hold down the ‘2’ and ‘8’ keys on the keypad at the same time for 0.5 sec or more.
3) Press the User Mode key once again.
• The copier will indicate ‘[1]’ on its control panel as soon as it enters service mode.
• The copier will end service mode in response to a press on the Reset key.

2. Selecting Service Mode

1) Select the mode you want for making checks or adjustments (Table 10-701) using the
keypad.
• The 10’s place will switch to indicate the input numeral.
• The copier will start making copies in response to a press on the Start key using the settings
that were effective immediately before the start of service mode.
2) Press the AE key.
• The copier will indicate a 3-digit number, and the 100’s place will start to flash and 10’ and
1’s places will turn on.
3) Select the mode you want to use for making checks or adjustments using the keypad.
• The 10’s and 1’s places will serve to indicate the input numerals.
• The copier will return to the condition in step 1) above in response to a press on the AE
key.
4) Press the Start key to execute the selected service mode.
• The copier will return to the condition in step 3) in response to a press on the AE key while
it is executing service mode.

To clear E000 through E004, operate as follows:
1) Select ‘412’ (clear E000–E004) in service mode.
• The copier’s control panel indicates the respective error code.
2) Press the Start key.
3) The copier will automatically turn off, clearing the error.

[ayeko.tgi]

i cannot start service mode press user mode key then 2 and 8 key 0.5 ore more and user mode key . how can i start service mode another way or what component i need to check

1. Starting Service Mode

1) Press the User Mode key.
2) Hold down the ‘2’ and ‘8’ keys on the keypad at the same time for 0.5 sec or more.
3) Press the User Mode key once again.
• The copier will indicate ‘[1]’ on its control panel as soon as it enters service mode.
• The copier will end service mode in response to a press on the Reset key.
2. Selecting Service Mode
1) Select the mode you want for making checks or adjustments (Table 10-701) using the
keypad.
• The 10’s place will switch to indicate the input numeral.
• The copier will start making copies in response to a press on the Start key using the settings
that were effective immediately before the start of service mode.
2) Press the AE key.
• The copier will indicate a 3-digit number, and the 100’s place will start to flash and 10’ and
1’s places will turn on.
3) Select the mode you want to use for making checks or adjustments using the keypad.
• The 10’s and 1’s places will serve to indicate the input numerals.
• The copier will return to the condition in step 1) above in response to a press on the AE
key.
4) Press the Start key to execute the selected service mode.
• The copier will return to the condition in step 3) in response to a press on the AE key while
it is executing service mode.

To clear E000 through E004, operate as follows:
1) Select ‘412’ (clear E000–E004) in service mode.
• The copier’s control panel indicates the respective error code.
2) Press the Start key.
3) The copier will automatically turn off, clearing the error.