Thanks:
0
Likes:
0
Dislikes:
0
-
Service Manager
100+ Posts
- Rep Power
- 34
Well any how
it look as if the friggin toner supply is the problem
Put in all new toner carts
ran fine
shut it down
turned it on and the toner supply seems very low.
Whats the DENS ratio in display service mode?
The normal % numbers to look for.
I had an old printout if the settings
and they were in the 19% C, M, Y
SOOOOOOOO
I did a Install/supply the get toner into the DEV's.and then a Stir
then a auto gradation
and the % went up
they were close to 4% C M Y each
the Magents is really a problem
looks as if the OEM toner NEW has clogged up the DEV unit.
Its acting like theres no DEV in the unit
BUT we JUST did a REFRESH/Restart of each color
and it worked great.
The toner supply seems as if its NOT cycling to the colors.
Hmmmm
So Its NOT the Drum
Seems as if the toner supplys have starved out the DEV units
GO Figure
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks