Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 22
  1. #1
    techsurp
    Guest

    need help on IR7105 with Saddle finisher V2

    Hi Folks, I need help on IR7105 with Saddle finisher V2 that we have just got in, it says "finisher cannot be used" but machine will still copy ok, I have been told i need to go into service mode to reset this, Can anyone please help me on how to get into the service mode on this machine. Thanks.

  2. #2
    Senior Tech 100+ Posts MrB's Avatar
    Join Date
    Nov 2009
    Posts
    147
    Rep Power
    31
    Sounds like the machine is "Limited Function Mode"
    Goto Addition Functions {*)
    Common Settings
    Go down a few pages
    Tap on limited Functions Mode
    If it's ON, tap "OFF", then OK
    Then press the reset button a few times, back to normal screen
    Then REBOOT your device
    Fingers crossed, everything should be okay

  3. #3
    techsurp
    Guest
    Hi and thanks for the swift reply, I have tried that a few times and after each reboot the are back on again but still no joy.....any other ideas?

  4. #4
    Service Manager 250+ Posts
    Join Date
    Oct 2008
    Posts
    281
    Rep Power
    34
    Try service mode Function>Clear>MMI and reboot.

  5. #5
    Field Supervisor 500+ Posts
    need help on IR7105 with Saddle finisher V2

    Herrmann's Avatar
    Join Date
    Jan 2006
    Location
    Germany, NorthRhine Westfalia
    Posts
    792
    Rep Power
    45
    Maybe, there is an error not shown on the screen....go into service mode, and look the error history for e5xxxx errors, then we can look further
    If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!

  6. #6
    Technician 250+ Posts
    Join Date
    Mar 2007
    Posts
    308
    Rep Power
    38
    You need to check for errors! I am sure there will be a finisher error. Address that error and your issues will be over.

  7. #7
    East Coast Imaging 2,500+ Posts
    need help on IR7105 with Saddle finisher V2

    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,399
    Rep Power
    69
    Quote Originally Posted by techsurp View Post
    Hi and thanks for the swift reply, I have tried that a few times and after each reboot the are back on again but still no joy.....any other ideas?
    Did you reset everything after disabling functions limited.
    Main unit then finisher. Finisher then main unit.
    Are there any other accessories, internal punch, pro punch, ETC.
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  8. #8
    techsurp
    Guest
    Hi Guys and thankls for all your continued help....I have tried dissableing the saddler, punch and stappler and feeder as advised and done a re-boot, after reboot they are all back on again but it still says finisher can not be used so something is still amiss, at least the actual IR7105 is ok so i think i will put it up for sale for just the copier itself and just throw in the finisher with it.....thanks for the help anyway chaps....chris

  9. #9
    Technician
    Join Date
    Feb 2009
    Location
    Midwest
    Posts
    48
    Rep Power
    31

    do complete shutdown

    you have to wait the 5 minutes until it tells you to power down switch on side. you can't short cut and just turn off remember power off V-2 first then hold off button till you get please wait shutting down
    Billy

  10. #10
    Professional Print 100+ Posts
    Join Date
    Jan 2010
    Posts
    108
    Rep Power
    30
    hi all
    i faced this problem 2 day ago , solved and the causes for this problem flag paper sensor correct pos.
    and before 1 year i faced same your problem and every thing is ok in this case but Fortunate the customer have another machine and i take board from the back of the finisher and problem solved
    i will send you the name and no of this board
    thanks

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here