Need SST and OS for Canon IR-3570

[teckat]

mama mia'

[jsw2k]

You can say that again...

[jsw2k]

Semi-Success...Got the Rom flashed, and SST is asking if HDD was replaced, and goes to initialize and reports:

Error response:Process has ended in error.

<<< FileName >>>
HDDFormatALL:C:\ServTool\iRXXXX\HDFormat\XXxxv0011 \iRXXXX-XXxx0011-HDFormat.ift


Module : SendFile() - 5

E240...

Possible wrong HDD? Here's the HDD info:


Old HDD
Hitachi Travelstar model HTS541020G9AT00
20GB ATA / IDE 5400RPM

P/N: 13G1581


New HDD
Hitachi Travelstar model HTS540040M9At00
40GB ATA/IDE 5400 RPM

I bought the exact same drive, but...who knows? Will this drive work?

[teckat]

Semi-Success...Got the Rom flashed, and SST is asking if HDD was replaced, and goes to initialize and reports:

Error response:Process has ended in error.

<<< FileName >>>
HDDFormatALL:C:\ServTool\iRXXXX\HDFormat\XXxxv0011 \iRXXXX-XXxx0011-HDFormat.ift


Module : SendFile() - 5

E240...

Possible wrong HDD? Here's the HDD info:


Old HDD
Hitachi Travelstar model HTS541020G9AT00
20GB ATA / IDE 5400RPM

P/N: 13G1581


New HDD
Hitachi Travelstar model HTS540040M9At00
40GB ATA/IDE 5400 RPM

I bought the exact same drive, but...who knows? Will this drive work?

First off that E240 is a Boot Rom error/ remove n' clean contacts/ re seat/ or replace it

WM2-5216-000/or FK2-4907-000 is that the part # u used ???
**** 20GB is the standard in this model/ think u can expand memory - but not HDD

on a new HDD u have to format first/ then update Boot Rom

[jsw2k]

I had to update the Boot Rom before I could upgrade the HDD...now I have version 11. something...

Where is the boot rom?

[teckat]

I had to update the Boot Rom before I could upgrade the HDD...now I have version 11. something...

Where is the boot rom?

if u don't know where the boot rom is/ i would advise to call for a qualified tech !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
v00.11 is the HD-FORMAT File/

v 40.03 is machine firmware

[jsw2k]

Unfortunately, I ARE the qualified tech on this job.

No matter, the issue was resolved; I cloned the old drive and burned the image on a drive NOT on the list of approved drives. Seems to work perfectly fine.

[teckat]

Unfortunately, I ARE the qualified tech on this job.

No matter, the issue was resolved; I cloned the old drive and burned the image on a drive NOT on the list of approved drives. Seems to work perfectly fine.

when a drive is not listed/ for the 3570 ,if the HD FORMAT v00.11 is used it supports additional drives not listed for iR3370_v40.03

Good fix !!!

[heri.smd]

I have sst and firmware ir 3570 UsenV4003, but i not found HDformat in list, help me solution that, I look single not found too in list

[teckat]

I have sst and firmware ir 3570 UsenV4003, but i not found HDformat in list, help me solution that, I look single not found too in list

Firmware is listed under 2270 under connect-
look in this path on your laptop> u should see a folder IRXXX --in there is th Format folder
C:\Canon File Folder\SST System Software Folder\SST Files\iR2270_v40.03.02

if u don't see it u need to re-register the firmware-

remember on this series> the SST MUST SEE YOUR HDD> either a Canon OEM part or similar to what u removed>
the iRXXXX-XXxx0011-HDFormat.ift file is encrypted & not visible ,so u cannot Modify the HDD Descriptor
for other non-OEM HDD's

READ PDF.>>>SST HDD Not Found.pdf



2270.JPG