Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 4 1234 LastLast
Results 1 to 10 of 32
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Oct 2008
    Location
    West Palm Beach
    Posts
    94
    Rep Power
    19

    Need SST and OS for Canon IR-3570

    I've got a bad drive and need to replace it.

    I understand I should do the firmware too.

    Where can I get these?

    Thanks!


  2. #2
    Technician
    Join Date
    Mar 2009
    Location
    Huntsville, Alabama
    Posts
    27
    Rep Power
    18
    Hi, I have a cust. who wants to ugrade their ir2870 to print,fax and scan. I have the items needed to do the job except the firmware.
    Does anyone have the firmware they could send me? Thank you very much in advance. abex1@knology.net
    T.B.


  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Oct 2008
    Location
    West Palm Beach
    Posts
    94
    Rep Power
    19
    Is the "firmware" also the "os"?


  4. #4
    Service Manager 10,000+ Posts
    Need SST and OS for Canon IR-3570

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,208
    Rep Power
    215
    YES !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    smell the coffee
    ~~~~~~
    ~~~~~~
    ~~~~~~



  5. #5
    Technician
    Join Date
    May 2009
    Location
    Johannesberg
    Posts
    13
    Rep Power
    18
    Hi. You cannot install firmware on a new hdd for this model. The HDD format file is encrypted,so you can't format the HDD. The only thing to do is to clone a working HDD from another machine.


  6. #6
    Technician
    Join Date
    May 2009
    Location
    Johannesberg
    Posts
    13
    Rep Power
    18
    Hi. All you need is the print boot rom, 256MB ram, fax kit and universal send kit. The firmware is the same regardless of the options that are installed.


  7. #7
    Lead Service Technician 1,000+ Posts mrfixit51's Avatar
    Join Date
    Oct 2008
    Location
    Davenport, Iowa
    Posts
    1,979
    Rep Power
    40
    Quote Originally Posted by Coling View Post
    Hi. You cannot install firmware on a new hdd for this model. The HDD format file is encrypted,so you can't format the HDD. The only thing to do is to clone a working HDD from another machine.
    I beg to differ,, the hard drive can be formatted using SST, just make sure to use the same drive model in the copier, or seek out the listing I created that lists the current hard drive models for each copier out there. Cloning a failing drive can recreate corrupted software, a clean install is always the best advice.


  8. #8
    Service Manager 10,000+ Posts
    Need SST and OS for Canon IR-3570

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,208
    Rep Power
    215
    Quote Originally Posted by Coling View Post
    Hi. You cannot install firmware on a new hdd for this model. The HDD format file is encrypted,so you can't format the HDD. The only thing to do is to clone a working HDD from another machine.

    Hey Coling
    >>that info is not correct
    *************** u can format any HDD
    On these models only !!!!!!!!!
    imageRUNNER 105+ / 9070 / 8070 / 85+
    imageRUNNER 4570 / 3570 / 2870 / 2270


    If a new HDD is installed with a Boot Rom version lower than v6.36, the system software cannot be installed, and the Boot Rom cannot be upgraded.

    Solution :
    Listed below are a few solutions for this issue.

    1. Carry and use a copier Boot Rom v6.36 or higher to format and install the System Software to the new HDD. The original Boot Rom [C or N] now can be upgraded, after flashing the System Software. Be sure the Boot Rom is model specific.
    2. Bring the original Boot Rom that is lower than v6.36 to a known working machine and flash it to v6.36 or higher. Install the Boot Rom back into the original machine, format and install the System software.


  9. #9
    Field Supervisor 500+ Posts
    Join Date
    Aug 2006
    Posts
    964
    Rep Power
    33
    Thanks for that info


  10. #10
    Technician
    Join Date
    May 2009
    Location
    Johannesberg
    Posts
    13
    Rep Power
    18
    Hi. Sorry, my statement should have read:You cannot install firmware on any type of HDD. I did not mean that the failing drive should be cloned!!


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here